It appears that your cart is currently empty
FREE SHIPPING ON ORDERS ABOVE $100!
Kingston Memory KSM24ES8/8ME 8GB 2400MHz DDR4 ECC CL17 DIMM 1Rx8 Micron ERetail
Kingston's KSM24ES8/8ME is a 1G x 72-bit (8GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, ECC, memory module, based on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
o Power Supply: VDD = 1.2V Typical
o VDDQ = 1.2V Typical
o VPP = 2.5V Typical
o VDDSPD = 2.2V to 3.6V
o Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
o Low-power auto self refresh (LPASR)
o Data bus inversion (DBI) for data bus
o On-die VREFDQ generation and calibration
o Single-rank
o On-board I2 serial presence-detect (SPD) EEPROM
o Temperature sensor with integrated SPD
o 16 internal banks 4 groups of 4 banks each
o Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
o Selectable BC4 or BL8 on-the-fly (OTF)
o Fly-by topology
o Terminated control command and address bus
o PCB: Height 1.23 (31.25mm)
o RoHS Compliant and Halogen-Free
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
46.16ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
TBD WNOTE
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
NOTE
Power will vary depending on the SDRAM used.
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00lb
Warranty Information
Lifetime"
o Power Supply: VDD = 1.2V Typical
o VDDQ = 1.2V Typical
o VPP = 2.5V Typical
o VDDSPD = 2.2V to 3.6V
o Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
o Low-power auto self refresh (LPASR)
o Data bus inversion (DBI) for data bus
o On-die VREFDQ generation and calibration
o Single-rank
o On-board I2 serial presence-detect (SPD) EEPROM
o Temperature sensor with integrated SPD
o 16 internal banks 4 groups of 4 banks each
o Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
o Selectable BC4 or BL8 on-the-fly (OTF)
o Fly-by topology
o Terminated control command and address bus
o PCB: Height 1.23 (31.25mm)
o RoHS Compliant and Halogen-Free
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
46.16ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
TBD WNOTE
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
NOTE
Power will vary depending on the SDRAM used.
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00lb
Warranty Information
Lifetime"
Shipping
Orders below $100: $10 flat rate
Orders above $100: FREE
Currently we only ship within the US.
Returns
You have 14 calendar days to return an item from the date you received it.
To be eligible for a return, your item must be unopened in the same condition that you received it.
Your item must be in the original packaging.
Your item needs to have the receipt or proof of purchase.
Refunds
Once we receive your item, we will inspect it and notify you that we have received your returned
item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment).
You will receive the credit within a certain amount of days, depending on your card issuer's policies.
Shipping
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.
If you receive a refund, the cost of return shipping will be deducted from your refund.
Contact Us
If you have any questions on how to return your item to us, contact us.