Key Features
1. Single AMD EPYC(TM) 7000-Series Processor
2. 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
3. Expansion slots: 3 PCI-E 3.0 x16, 3 PCI-E 3.0 x8
4. 16 SATA3, 1 M.2
5. Dual Gigabit Ethernet LAN Ports
6. ASPEED AST2500 BMC graphics
7. 5 USB 3.0 ports (2 rear + 2 via header + 1 Type A) 4 USB 2.0 ports (2 rear + 2 via header)
8. 7 PWM 4-pin Fans with tachometer status monitoring
Form Factor
ATX
Processor/Chipset
CPU:
- Single AMD EPYC 7000-series Processor
- Socket SP3
Chipset: System on Chip
System Memory
Memory Capacity:
- 8 DIMM slots
- Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
- 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage: 1.2V
Error Detection:
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board Devices
SATA: SATA3 (6 Gbps)
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
Network Controllers:
- 2 1GbE LAN via Intel I210
- 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA: ASPEED AST2500 BMC
Input / Output
SATA: 16 SATA3 (6 Gbps) ports
LAN:
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB:
- 5 USB 3.0 ports (2 rear, + 2 via header + 1 Type A)
- 4 USB 2.0 ports (2 rear + 2 via header)
VGA: 1 VGA port
Others:
- 1 COM port (rear)
- 2 SATA DOM power connector
- 1 TPM 1.2 header
Expansion Slots
PCI-Express:
- 3 PCI-E 3.0 x8
- 3 PCI-E 3.0 x16
M.2:
- Interface: PCI-E 3.0 x4
- Form factor: 2260, 2280, 22110
- Support SATA devices
System BIOS
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features:
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
Management
Software:
- Super Doctor 5
- Watch Dog
- NMI
- SUM
- IPMI 2.0, KVM with dedicated LAN
Power Configurations:
- ACPI Power Management
- Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU:
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
- CPU switching voltage regulator
- Supports system management utility
- VBAT
FAN:
- Up to 7-fan status tachometer monitoring
- Up to 7 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 7x Fan connectors
- I2C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features:
- Chassis Intrusion Detection
- Chassis Intrusion Header
- UID
Environmental Specifications
- Operating Temperature: 10oC to 35oC (50oF to 95oF)
- Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension ( L inch x W inch x H inch)
12 x 10 x 1
Weight
3.00 lb
Warranty Information
1 Year
Shipping
Orders below $100: $10 flat rate
Orders above $100: FREE
Currently we only ship within the US.
Returns
You have 14 calendar days to return an item from the date you received it.
To be eligible for a return, your item must be unopened in the same condition that you received it.
Your item must be in the original packaging.
Your item needs to have the receipt or proof of purchase.
Refunds
Once we receive your item, we will inspect it and notify you that we have received your returned
item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment).
You will receive the credit within a certain amount of days, depending on your card issuer's policies.
Shipping
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.
If you receive a refund, the cost of return shipping will be deducted from your refund.
Contact Us
If you have any questions on how to return your item to us, contact us.